Fix Elf Bar BC5000 Blinking 3 Times: Troubleshooting Tips

The elf bar bc5000 blinks 3 times when the battery is low or needs to be charged. The blinking is a warning sign and indicates that it’s time to recharge the battery.

If you’re an elf bar bc5000 user, seeing the device blink three times can be frustrating. But before you start panicking or throwing away your device, it’s essential to understand what this blinking signifies. The elf bar bc5000 is a disposable vaping device that comes with a pre-charged battery.

However, with time, the battery’s power reduces and needs to be recharged. This is when the device blinks three times, indicating a need for a recharge. In this article, we will take a closer look at why the elf bar bc5000 blinks three times and explore ways to fix this issue.

Understanding The Problem

What Does It Mean When The Elf Bar Blinks 3 Times?

If you are using the elf bar bc5000 and notice that it begins to blink thrice, it indicates a problem. The device has a battery capacity of 500mah and is popular among people who enjoy vaping. However, the blinking issue can be frustrating.

Here are some possible reasons for the blinking issue.

Common Causes Of The Blinking Issue

If you experience the blinking issue with your elf bar bc5000, the following reasons might be at play.

  • Battery is low: The device requires a certain amount of power to operate, and if the battery level is low, it could cause the blinking issue.
  • Draw-activation sensor malfunction: The blinking issue could stem from a faulty draw-activation sensor, which means the device is not sensing when you’re inhaling.
  • Coil malfunction: There might be issues with the coil in your device.
  • Pod issue: If the blinking persists, the issue could be with your e-liquid pod.

How To Determine The Specific Cause For Your Bc5000

To determine the specific cause of the blinking issue with your elf bar bc5000, follow these steps.

  • Check the battery life: Ensure the battery is charged and has enough capacity to operate. You can also try using a different charging cable to determine if it’s a charging issue.
  • Test the draw-activation sensor: Try drawing the vapor from the mouthpiece when the device is on. If it works, the sensor is fine. If not, you may need to reach out to the manufacturer.
  • Check the coil: If the coil is not aligned correctly, it could cause the blinking issue. Try adjusting the coil position or replacing it altogether.
  • Inspect the pod: Issues with the e-liquid pod could cause the blinking issue. Try using a different pod to determine if that’s the problem.

Understanding the blinking issue with your elf bar bc5000 can save you time and money. Applying the above steps will help you determine the cause of the issue and find the best solution.

Troubleshooting Tips

Tip 1: Checking The Battery Connection

If your elf bar bc5000 is blinking 3 times, one of the most common reasons could be an issue with the battery connection. Follow these troubleshooting tips to find out what’s causing the problem:

  • First, check to see if the positive and negative terminals of the battery are securely connected to the device’s connection points.
  • If the terminals look loose, tighten them up by lightly squeezing them with pliers or tweezers.
  • Make sure you’ve inserted the battery correctly into the elf bar. The positive end must be facing up towards the mouthpiece.

Tip 2: Checking The Charge Level

If the battery connection looks okay, the next step is to check the charge level. Here’s how:

  • Connect the elf bar to a usb port or wall adapter with a charging cable.
  • Observe the led light. If it lights up when plugged in, let it charge until the light turns off. This process usually takes around 30-60 minutes.
  • If the charging light is not turning on, try using a different charging cable. When the charging cable is bent or damaged, it may affect the charging and syncing process.

Tip 3: Cleaning The Elf Bar

Sometimes, issues with your elf bar can be resolved as easily as cleaning the device. If you’ve already checked the battery connection and charge level, it’s time to clean your elf bar. Follow these steps:

  • Use a clean, dry toothbrush or a small brush to remove any debris from the device’s connection points.
  • Wipe the outside of the elf bar with a cloth soaked in rubbing alcohol to sanitize it.
  • If you’re still experiencing problems, consider using a cotton bud to lightly clean the air hole. This part can become clogged with dust and e-liquid over time.

Tip 4: Resetting The Elf Bar

When none of the above methods help, the final step in troubleshooting your elf bar is resetting the device. Here’s how to do it:

  • Make sure the elf bar is fully charged.
  • Remove the pod from the elf bar.
  • Gently insert a toothpick or a small needle into the device’s reset button.
  • Press and hold the button for 5-10 seconds. Release it.
  • Place the pod back into the elf bar and try using it again.

By following these troubleshooting tips, you can get your elf bar bc5000 back to working order in no time!

Advanced Troubleshooting Tips

The elf bar bc5000 is a popular vaping device known for its reliability and durability. However, like any other device, it can experience technical issues that can be frustrating for users. When your device starts blinking three times, it’s important to troubleshoot to determine the underlying issue.

Here are a few advanced troubleshooting tips to get you started:

Tip 5: Replacing The Coil

If you have tried charging the device and resetting it to no avail, the issue may lie with the coil. Replacing the coil is one of the most common troubleshooting techniques for fixing the blinking issue on the elf bar bc5000.

Here’s how to do it:

  • Remove the pod from the device and turn it upside down
  • Unscrew the bottom of the pod to access the coil
  • Unscrew the old coil and screw in a new one
  • Screw the bottom of the pod back on
  • Place the pod back into the device and test it

Tip 6: Updating The Firmware

Updating the firmware of the elf bar bc5000 can also be beneficial in solving the blinking issue. If you haven’t done this before, here’s how to do it:

  • Connect the device to your computer using a mini-usb cable
  • Download the firmware update file from the elf bar website
  • Open the firmware update software and choose the update file
  • Follow the on-screen instructions to complete the update
  • Disconnect the device from the computer and test it

Hopefully, these advanced troubleshooting tips can help you to solve the blinking issue on your elf bar bc5000. If none of these tips solve the issue, it may be time to take your device to a professional for repair. Remember to always follow the manufacturer’s instructions when troubleshooting your device.

Frequently Asked Questions

What Does It Mean When Your Elf Bar Bc5000 Blinks 3 Times?

When your elf bar bc5000 blinks 3 times, it is an indication of a low battery.

How Can I Fix My Elf Bar Bc5000 Blinking 3 Times?

To fix the blinking 3 times issue, charge your elf bar bc5000 with a compatible charging cable.

How Long Should I Charge My Elf Bar Bc5000 For?

Charge your elf bar bc5000 for approximately 2-3 hours to ensure a full charge.

Can I Still Use My Elf Bar Bc5000 While Charging?

Yes, you can still use your elf bar bc5000 e-cigarette while it is charging.

What Should I Do If My Elf Bar Bc5000 Still Blinks 3 Times After Charging?

If your elf bar bc5000 continues to blink 3 times after charging, try using a different charging cable or contact customer support for assistance.


Considering the blinking 3 times issue of elf bar bc5000, we can conclude that looking for a reliable device to fulfill your vaping needs can be overwhelming. With the rapid advancements in technology, selecting the right product may take some research and patience.

That said, the blinking 3 times problem with the elf bar bc5000 can be easily resolved by following some simple tricks. Whether it’s cleaning the contact points or reinstalling the cartridge, a little troubleshooting can go a long way. It’s always advisable to read the product manual to get a better understanding of the device’s functionalities and limitations.

Elf bar bc5000 has gained its popularity due to its quality performance and convenience. However, like any other electronic device, it can encounter technical problems that can be fixed with some precautions and maintenance. By following the given tips, you can combat the blinking 3 times issue and enjoy your vaping experience.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.